Factory Training

Total Door and its distributors provide comprehensive maintenance and installation training based on your requirements. We offer a three day installation and electric seminar at our factory in Waterford, Michigan. If classes become full and there is enough demand we often add another session the following month.

Our distributors often provide local seminars on maintenance and trouble shooting procedures. These short sessions quickly take the mystery out of the door. We have a number of clients who often state how surprised they are at how easy it is to maintain a Total Door once you understand the procedure.

Installation Training Downloads

Seminar Sign-Up - Complete the form and fax to 248-623-6866. Class sizes are limited. (In Excel format.)Revised: 12-2-2011
Seminar Information - Seminar info (in Word format). Revised: 12-2-2011
Seminar Agenda - Agenda (in PDF format).

Installation, Maintenance, Troubleshooting and Electrical Seminar

(OPNG-02) 17 AIA/CES credits and (03-0623) 45 DHI CEU credits

We offer a three-day installation, maintenence, troubleshooting and electrical seminar at our factory in Waterford, Michigan. If classes become full and there is enough demand, we often add another session the following month, so check back frequently.

February 22 - 24, 2012
March 28 - 30, 2012
April 25 - 27, 2012
May 30 – June 1, 2012
June 27 - 29, 2012
July 25 - 27, 2012
August 29 - 31, 2012
September 26 - 28, 2012
October 24 - 26, 2012
November 28 - 30, 2012

Installation/Maintenance/Troubleshooting/Electrical Training Agenda

Day 1

8:00 – 8:15 a.m. Coffee and Donuts
8:15 – 9:00 a.m. Introduction/Background/Showroom
9:00 – 9:30 a.m. Frames
9:30 – 10:00 a.m. Hinge
10:00 – 10:15 a.m. Break
10:15 – 11:15 p.m. Latch Side
11:15 – 12:00 p.m. Mechanism Overview (lever, grip,panic, flush panic)
12:00 - 12:30 p.m. Lunch
12:30 – 1:30 p.m. Mechanisms (hands-on)
1:30 - 2:00 p.m. Grip (hands-on)
2:00 - 3:45 p.m. Hands-on (2' x 4' doors)
3:45 - 4:00 p.m. Recap of day's lesson/Questions
5:30 p.m. Dinner

Day 2

8:00 – 8:15 a.m. Coffee and Donuts
8:15 – 9:00 a.m. Plant Tour
9:00 – 9:45 a.m. A100 (for door location on site-Installation Procedures)
9:45 – 10:15 a.m. Closer Installation/Mags
10:15 – 10:30 a.m. Break
10:30 – 11:30 p.m. Troubleshoot
11:30 – 12:00 p.m. Lunch
12:00 – 2:00 p.m. Hands-on Installation
2:00 - 2:15 p.m. Break
2:15 – 3:15 p.m. Troubleshoot (previously hung doors)
3:15 - 4:00 p.m. Recap of day's lesson/Questions/Test
5:30 p.m. Dinner

Day 3

8:00 – 8:15 a.m. Coffee and Donuts
8:15 – 8:30 a.m. Frames
8:30 – 9:05 a.m. Meters and Meter Readings
9:00 – 10:00 a.m. Power Supply and Solenoids
10:00 – 10:15 a.m. Break
10:15 – 11:00 a.m. Solenoids and Mechanical Functions
11:00 – 11:30 a.m. Automatic Door Operators
11:30 – 12:00 p.m. Troubleshooting
12:00 – 12:30 p.m. Test
12:30 – 1:00 p.m. Lunch

If you are interested in our training options, please contact your local distributor or call the factory (866-781-2069) for a current schedule and enrollment procedures.

TIMES: The Total Door Seminar begins promptly on Wednesday at 8:00 a.m. All attendees should plan to arrive at Total Door about 10 minutes early each day. Come ready to work at that time. The seminar will last until 1:00 p.m. on Friday. Please do not schedule your flights until you receive your confirmation letter. We also recommend that you do not schedule any outgoing flights before 4:00 p.m. when you depart on Friday night.

Product Training

Dates to be determined
Current registrations will be rescheduled

Registration form

If you are interested in our training options please contact your local distributor or call the factory (866-781-2069) for a current schedule and enrollment procedures.